Dimensions: 1,200mm (w) x 300mm (d) x 2,200mm (h)
Application: Telecom Infrastructure and Data Centre - Splice and Patch, Cross Connect, Internal Distribution, Meet me Room (MMR), Internal and zone distribution cabling
The 314 / 315 series ODF is a leading edge solution, which can be configured to support a variety of applications, including ultra high density splice/ patch of incoming line cable, or as a patching / distribution frame.
This ODF can be configured for top and bottom internal cross connects within a single ODF. As an example, various FTP’s can be deployed in the bottom half of the ODF for incoming line cable, whilst the top half FTP’s can be configured for outgoing distribution cabling, using a preterm MTP solution.
There are many other deployment options, as this ODF can be easily configured by using a variety of FTP’s.
The internal fibre spool arrangements have been optimised to provide maximum capacity for storage and cross connects within the ODF.
Therefore, most patchleads would route internally in the ODF, with only trunk, distribution or line cable exiting/entering the ODF.
However, there is also provision for some patchcords to exit/enter the ODF if required.One of the main benefits of the WBT ODF single sided access solution, is its ability to be placed against walls, back to back, or at the end of aisles, requiring minimal floor space.
High-density port count, based on LC/APC or LC/PC connectivity, thereby significantly reducing floor space and associated lease costs within the DC environment.
|
Part No. |
Description |
|
TC4050314E |
UHDODF 1200mm x 300mm x 2200mm, internal cross connect, 21” rails |
| TC4050315E |
UHDODF 1200mm x 300mm x 2200mm, internal cross connect (top internal duct), 21” rails |
|
TC4050-170DCKITE |
Door and side panel kit to suit 313 series ODF |
|
TC4050-349KIT-GY10 |
Duct cover side panels for 313 series ODF |
|
TC4050TMKIT |
Underfloor mounting kit for HDODF |
|
105X49-L2.5 |
Black transport tubing, 6.5 OD, 4.5 ID L=2.5M |
WBT fibre optic infrastructure solutions have elevated cable management to the next level. These high-density solutions can be deployed separately or as an end-to-end solution in a Data Centre or Telecommunications network.
Application includes:
The end to end solution also provides scalability at RU level, with 96F and 144F LC or LC/A deployments.
Can be deployed as an end to end network solution in any Data Centre or Telecommunications network and is compatible with stranded or ultra high density rollable ribbon cable types (864F, 1728F, 3456F, 6912F).
Ultra high density Fibre Termination Panels (FTP’s) or other associated infrastructure can also be successfully deployed as standalone solutions.
LC-LC/A
per RU modules
(splice &/or patch)
in 300mm deep,
single side ODF*
deployment
LC-LC/A
per RU modules
(splice &/or patch)
in 300mm deep,
single side ODF*
deployment
MTP®/MPO
per RU modules
(splice &/or patch)
in 300mm deep,
single side ODF*
deployment
*ODFs can be placed back to back and capacities can be doubled in a 600mm deep footprint
