This hybrid ⅞” multi feed trunk cable with hybrid junction box is used as part of pre-terminated solution to allow for fast and easy installation. The hybrid junction box provides 4 x hybrid terminal port connections, combining optical and DC power in one hybrid plug-and-play connector, designed to provide 4F MPO and 8F MPO RRU connections.
On one end of the hybrid trunk cable is the BBU, pre-terminated with 2 x 12F MPO connectors (A & B) and 4 pairs of unterminated copper cables. The other end is connected to the RRU via the 2 x pluggable bulkhead 4-pin DC power connections, and 2 x 12F MPO connectors (A & B), located at the bottom part of the hybrid junction box. This feature facilitates the ease of installation of the 7/8” hybrid cable to the junction box, allowing separate access of the main trunk cable, without disturbing the internal optical and power wiring of the junction box.
Hybrid 7/8" cable, optical MPO-MPO, power connections without junction box
This 7/8” multi-feed trunk cable is used as part of a pre-terminated solution to allow for fast and easy installation. The cable is used with a Junction Box which is also available separately. This pre-terminated solution is specifically designed for connecting up to 4 RRU’s and provides a quick and effective means of adding extra wireless sectors at a Mobiles base station.
Hybrid Jumper Cables
Hybrid jumper cables are required to provide the final connection from the junction box to the RRU. These cables provide both optical fibre and power connection. In addition, the RRU connection side can also be customised to suit a variety of RRU vendor interfaces. The RRU connectivity side features a weather-proof DC power connector and a fully sealed, IP rated Full AXS LC duplex connector.
2 fibres, 1 power, hybrid jumper cables