Convoluted tube split with cover, 50mm dia, 1m

Convoluted tube split with cover, 50mm dia, 1m

Convoluted tube, 50mm dia, 1m

Convoluted tube, 50mm dia, 1m

Convoluted tube, flexible, 88mm OD, 2m

Convoluted tube, flexible, 88mm OD, 2m

Convoluted tube split with cover, 50mm dia, 1m

A$58.44
WBT P/N
TC1279-350

This is a split, convoluted tube that is used as a flexible take off point with either: 50, 100 or 220mm ducting systems. The split, convoluted tube is typically used with: a Drop Off Assembly (Part No: TC1279-41A); a Drop Off Kit (Part No: TC1279-41Kit); an End Cover 100mm duct, with 2 x 46mm dia holes (Part No: TC1279-57C); or a Top Outlet Assembly, Vertical Outlet (Part No: TC1279-307ASL) or Horizontal Outlet (Part No: TC1279-290ASL); which are available separately. For 100mm duct, with end cover Part No: TC1279-57C, two drop-off tubes can be installed at the end of the duct. A Drop-Off point allows optical fibre cords to be fed from the overhead ducting system to transmission equipment located in a lower rack. The split, convoluted tube assembly consists of an inner and an outer split tube set. It is recommended for up to a maximum of 60 – 3mm dia optical fibre cords.

  • Joiners are not required 
  • Comprises an inner and outer split, tube set 
  • Recommended fibre-count up to 60 x 3mm dia optical fibre cords (maximum) 
  • Used with: a Drop Off Assembly (Part No: TC1279-41A); a Drop Off Kit (Part No: TC1279-41Kit); or End Cover 100mm duct, with 2 x 46mm dia holes (Part No: TC1279-57C); or a Top Outlet Assembly, Vertical Outlet (Part No: TC1279- 307ASL) or Horizontal Outlet (Part No: TC1279-290ASL); which are available separately