Duct side spill out, straight outlet to convoluted tubing

Duct side spill out, straight outlet to convoluted tubing

Breakout kit, 50mm

Breakout kit, 50mm

Duct side spill out, 90 degree to convoluted tubing

Duct side spill out, 90 degree to convoluted tubing

Duct side spill out, straight outlet to convoluted tubing

A$44.74

The side spill-out duct can be installed anywhere along the length of a 100mm high duct and allows for up to 80 pcs of 2mm dia optical fibre to exit horizontally or vertically (if installed on the floor of a straight duct).

WBT P/N
TC1279-602A

This drop‐off assembly can be installed anywhere along the length of a 100mm high duct (ie100 x 100mm; 220 x 100mm and 300 x 100mm duct), to allow up to 80 pcs of 2mm dia optical fibre cord to leave the duct horizontally; or vertically (if installed on the floor of straight duct). The cords leave in 44mm ID/50mm OD convoluted tube to transfer to other areas in the Exchange or CO. The assembly snap fits together in a 60mm dia hole cut into the side of the duct using a hole saw (Part No: TC1279‐800); that is available separately. The hole position is first marked on the duct side wall, or floor with a template (Part No: TC1279‐604KIT). It is recommended that a hand brace and bit style tool, rather than a power tool, be used to cut the hole if it is cut in the overhead working position. An optical fibre cord protection unit (Part No: TC1279‐50‐3) should be used to protect installed optical fibre cords as the 60mm dia hole is cut. This item is available separately.

  • Outlet clips into a 60mm dia hole cut into the 100mm high side of the duct, or on the floor of the duct
  • Outlet provided with a protruding curved length ways surface to guide optical fibre cords smoothly into the outlet
  • The outlet member clips into a convoluted tube connector, using 4 x clips, that holds the assembly firmly into the 60mm dia hole in the side of the duct
  • Convoluted tube 44mm ID/50mm OD (Part No: TC1279‐ 26Y [1 metre long] or TC1279‐53Y [2 metres long]) screws into the horizontal convoluted tube connector, to make a secure connection. This convoluted tube is available separately
  • The convoluted tube holds up to 80 x 2mm dia optical fibre cords
  • Purchase as a kit
Dimensions 155mm (W) x 65mm (H) x 70mm (D)
Weight 44 grams
Materials Fire Retardant Plastic, Halogen Free , UL 94‐VO Rated