Fibre optic patch panel, Splice/Patch, SC/A, 24 fibre ribbon, 1RU, 2x4 left pivot, 19 inch

In stock
Stock Code
60063221086081L
A$652.03 Incl. GST
favorite Add to Wish List

This subrack is typically used in Optical Fibre Termination Frames, with 2 x 12 fibre Incoming Ribbon Fibres.

The main functions of the subrack are to provide: a managed standard fibre installation, reticulation, interconnection, distribution, re-arrangement and maintenance activities at a common point. It also allows for fibre testing and fault finding activities. Typically an external 12 fibre optical fibre ribbon is fusion spliced to a 12 fibre ribbon/ to 12 x A/SC pigtails (housed in a break – out unit). The pigtails connect to patch cords at the patch panel. Typically the patch cords can cross-connect (in a FTF) or connect to transmission equipment.

A major feature of this subrack is the minimum amount of movement that occurs to transport tubes and optical fibre cords, as the tray opens and closes. This ensures a very high degree of protection for working services. Also, the fusion splices and pigtails are located in a protected position, because there is very little chance of them being disturbed when patch cords are being installed, as the subracks tray only needs to be opened a very small amount.

  • Splice/Patch LH pivot open Subrack (1RU), for 24 optical fibres, rear mounts in a 19“ rack
  • Maintains fibre bending radii throughout, for terminated optical fibres at 30mm.
  • Supplied with 2 x 12 fibre, splice tray assembly (Part No: TC251S-2AX), for 2 x 12 fibre ribbon fusion splices.
  • One splice protector clip (Part No: TC250S-23) provided on each splice tray.
  • Optical fibre transport tubes, containing 12 fibre ribbons, are fed to the subracks RHS entry securing point, then around the rear of the body under a guiding/protection plate, to pass around the LHS guiding cylinder to the splice trays – in large, smooth curves.
  • 2 x break – out units from 12 fibre ribbon to 12 x 900 μm singlemode pigtails are supplied
  • Provides patching connection for up to 24 optical fibres, with A/SC connectors
  • Entry and exit optical fibre cords are guided by 30mm radius removable guides
  • An easily accessible, hinged cover, with a patch panel label is provided in front of the patch panel
  • A/SC connectors supplied with a ceramic, zirconia ferrule
  • Through adaptors positioned with flange located at rear of the patch panel
  • Simplex A/SC through adaptors, supplied with a ceramic, zirconia ferrule
  • Supplied with 19” rear mounting brackets and mounting hardware
  • Hook and loop style fasteners supplied
  • Heat shrink splice protectors for 2 x 12 fibre Ribbons supplied
  • Purchase as a unit

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Looking for optic fibre and copper communications equipment?

Contact us