Application of a heat shrink splice protector immediately after fusion splicing will protect the spliced optical fibre during installation, handling and storage for many years of the fibre’s lifetime. The heat shrink sleeves have been tested to Telcordia (Bellcore) Spec GR1380. Each protector has a clear outer polyolefin tube, an inner copolymer dielectric sleeve and a stainless steel strength member for low heat absorption and electrical resistance. Typically, these heat shrink splice protectors are used in: splice trays, splice/patch subracks and COFTU’s.
Standard length is 40mm, other lengths are available; e.g. 60mm
Shrinks to Ø2.6-2.8mm
Each sleeve has an inner dielectric sleeve
Each sleeve has a stainless steel strength member
Easily and quickly installed
Available as: a pack of 100 (Part No: 100x080)
Various splice protector holders are available e.g. 4 position (Part No: TC250S-30), 6 position (TC250S-10), 12 position (TC250S-13). These are used in various splice trays e.g.Small TC250S-1X (6f or 12f); Universal TC251S-XAX (12f or 24f); TC248S (60f);TC248S-72A (72f) and TC249S96 (96f)
