Meets G652D specification. Yellow, Ø9μm core, Ø125μm cladding and a Ø900μm tight buffered jacket.
This SMOF, pigtail cord with LC UPC Grade A* connectors, of 6.0m length, is supplied with Ø2.0 mm duplex optical fibre cords. The SMOF meets G652D specification, with no water peak in the wavelength profile graph. A duplex (figure “8”) cord comprises two single fibre cords, joined side by side. The duplex cord is easily separated into single cords if required. This cord can withstand 10 full turns (360o) twists over a one-metre length, without causing any significant increase in attenuation. However for best performance when using the duplex cord, full twists are best avoided. Each single optical fibre cord has the following features: coloured yellow; Ø9µm core; Ø125µm cladding; and a Ø900µm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member, provided under an LSZH sheath. The cord has physical properties of minimum tensile strength of 100 Newtons; an MBR of 25mm; ability to withstand a small crushing load; and the ability to withstand a small impact load. The cord also passes a standard edge bend test.
6m cord:
Dimensions |
Connector 6mm (W) x 10mm (H)(Over Latch Clip) x 50mm (L) (Over Boot) x Cord 6.0m long |
Weight |
124 g |
Materials |
Various |
Color |
Yellow and Blue |