The side spill-out duct can be installed anywhere along the length of a 100mm high duct and allows for up to 80 pcs of 2mm dia optical fibre to exit horizontally or vertically (if installed on the floor of a straight duct).
This drop‐off assembly can be installed anywhere along the length of a 100mm high duct (ie100 x 100mm; 220 x 100mm and 300 x 100mm duct), to allow up to 80 pcs of 2mm dia optical fibre cord to leave the duct horizontally; or vertically (if installed on the floor of straight duct). The cords leave in 44mm ID/50mm OD convoluted tube to transfer to other areas in the Exchange or CO. The assembly snap fits together in a 60mm dia hole cut into the side of the duct using a hole saw (Part No: TC1279‐800); that is available separately. The hole position is first marked on the duct side wall, or floor with a template (Part No: TC1279‐604KIT). It is recommended that a hand brace and bit style tool, rather than a power tool, be used to cut the hole if it is cut in the overhead working position. An optical fibre cord protection unit (Part No: TC1279‐50‐3) should be used to protect installed optical fibre cords as the 60mm dia hole is cut. This item is available separately.
Dimensions | 155mm (W) x 65mm (H) x 70mm (D) |
Weight | 44 grams |
Materials | Fire Retardant Plastic, Halogen Free , UL 94‐VO Rated |