Fibre optic patch panel, splice only, 144 fibre, 3RU, left pivot

A$2,544.70

WBT P/N

60103222002081L

Details

This subrack is typically used in Optical Fibre Termination activities, where low fusion splice losses are needed for high capacity optical fibre transmission systems, such as e.g. DWDM systems.

A major feature of this subrack is the minimum amount of movement that occurs to optical fibre loose tubes and optical fibre cords as the pivot tray opens and closes. This ensures a very high degree of protection for working services. Also, the rear located splice trays are housed in a protected position, because there is very little chance of them being disturbed, as the subracks tray is opened.

More Information

More Information
Telstra Product Name	MODULE,SPLICE ONLY 144F 3RU
Telstra SKU	40006849
Fibre Capacity	144F
Size	3RU
UNSPSC	43222814

Features

Splice/Splice LH pivot open Subrack (3RU), for 144 optical fibres, mid or rear mounts in a 19“ rack
Maintains fibre bending radii throughout, for terminated optical fibres at 30mm.
Supplied with 1 set of 12 high, 12 fibre, splice tray assembly (Part No: TC254S-12AX), for 144 fusion splices. One 12 fibre splice protector holder clip (Part No: TC250S-33) is located on each splice tray.
A 50mm x 50mm duct length is provided to run optical fibre cords from RHS to LHS around the rear of the subracks body. This allows optical fibre cords to enter and leave from both the LHS and RHS front corners of the subrack.
Adjacent to RHS front optical fibre cord entry port, is situated a guide to enable entering cords to flow smoothly onto the rear 50mm x 50mm duct
On the pivot tray adjacent to the RHS duct entry guide, is a raised edge with a large aperture, hook and loop tie, intended to prevent protection/loose tubes and optical fibre cords entering the splice trays, from becoming caught by the duct entry guide.
Both the LHS and RHS entry/exit ports have 2 x 30mm radius guides for guiding optical fibre cords.
The optical fibre cords are secured to the radius guides by hook and loop ties.
A large guide bracket for protection/loose tubes and optical fibre cords is located on the pivot tray, near the pivot to guide entering protection/loose tubes and optical fibre cords.
Both entering and outgoing optical fibre cords are fastened by hook and loop style ties
An easily accessible, hinged, record system is provided inside the front cover. Cover secured with magnetic catches.
An accessory kit is provided, including hook and loop style ties
Heat shrink splice protectors (Part No: 100 x 080); available separately
Mid or rear mounts in a 19” rack
Purchase as a unit

Specifications

Dimensions	440/531mm (W)(Body/Mounts) x 133.5mm (H) x 282mm (D)
Weight	6.1 kg
Materials	Steel and Plastic
Colour	Light Grey