Fibre optic patch panel, Splice/Patch, SC/A, 72 fibre ribbon, 2RU, 8x3 left pivot, 19 inch

Fibre optic patch panel, Splice/Patch, SC/A, 72 fibre ribbon, 2RU, 8x3 left pivot, 19 inch

Fibre optic patch panel, Splice/Patch, SC/A, 72 fibre, 2RU, left pivot

Fibre optic patch panel, Splice/Patch, SC/A, 72 fibre, 2RU, left pivot

Fibre optic patch panel, Splice/Patch, SC/A, 72 fibre stranded, 2RU, 8x3 left pivot, 19 inch

Fibre optic patch panel, Splice/Patch, SC/A, 72 fibre stranded, 2RU, 8x3 left pivot, 19 inch

Fibre optic patch panel, Splice/Patch, SC/A, 72 fibre ribbon, 2RU, 8x3 left pivot, 19 inch

A$1,523.95
WBT P/N
60083221294081L

This 2RU, LH pivot open Splice/Patch subrack accommodates 72 -SM ribbon optical fibres. It features optical fibre cord management, that maintains the MBR at 30 mm radius throughout. This subrack rear mounts in 19 inch rear rack rails. At the rear of the swing out tray, an assembly of six, individually accessible, splice trays are provided (Part No: TC251S-6AX). Each tray holds 1 x 12 ribbon fibre fusion splice, to a 12 fibre ribbon/pigtail fan - out module. The splice trays are fitted with two plastic protector holder clips. A ribbon splice holder clip (Part No: TC250S-7), and a ribbon/ pigtail fanout module clip (Part No: TC250S-23). Situated along the swing out tray are: 3 angled position patch panels, for 24 simplex SM-A/SC through adaptors. The rear of the swing out tray is slightly raised to provide clearance over the ribbon fibre break-out module, and also for the supplied ribbon fibre transport tubes. At the LHS swing out tray entry, a radius guide and two curved guides are provided to guarantee the MBR for optical fibre cords on entry and exit. A 72 fibre ribbon optical fibre cable is fed to the trays RHS entry securing point; then to the ribbon break-out module. Here the 12 fibre ribbons separate into individual transport tubes that are fed around the rear of the body, through hook and loop ties, to pass around the LHS guiding cylinder, travelling in a smooth, large radius, natural curve, to the splice trays. Along the front face of the swing out tray, tie-off slots are provided for optical fibre cords. At the front of the swing out tray is a label showing patch panel layout. The front edge is non-continuous to allow for probe style instruments to inspect the through adaptors and connectors. The leaving optical fibre cord/s are run directly into the LHS of the HDODF. This 72 fibre, splice/patch subrack is typically used in a HDODF set up to provide FTTX services.

More Information
NBN SKU 10002329
Fibre Capacity 72F
Size 2RU
  • Maintains fibre bending radii throughout, for all optical fibres at 30mm
  • Supplied with 1 set of 6 high 12 fibre, splice tray assemblies (Part No: TC251S-6AX), for ribbon fusion
  • splices, and storage of the ribbon/pigtail fan-out module
  • Two snap-fit-in plastic protector clips provided on each splice tray
  • Splicing aided by using the splice tray holding bracket, to hold open the splice tray stack
  • Optical fibre ribbons are fed into the trays RHS entry securing point, then around the rear of the body under a raised swing out tray, to the ribbon fibre break-out module. From the module 6 x 12 fibre ribbons housed in natural color transport tubes, pass around the LHS guiding cylinder to the splice trays, whilst traversing a smooth, large radius curved path. The break-out module and transport tubes are supplied
  • Provides patching connection for up to 72 optical fibres, with SM-A/SC connectors
  • Leaving fibre cords are guided by 30mm radius removable guides
  • An easily accessible, hinged cover, with a patch panel label is provided in front of the patch panel
  • The swing out tray has a non continuous front edge, to allow for connector inspection using probe type instruments
  • Singlemode, A/SC connectors supplied with a ceramic, zirconia ferrule
  • Pigtails (900 micron) and simplex SM, A/SC through adaptors, supplied
  • A plastic cover is supplied
  • Supplied with 19 inch rear mounting brackets and mounting hardware
  • Hook and loop fasteners supplied
  • 6 off, 12 fibre ribbon heat shrink splice protectors supplied
  • Purchase as a unit
Dimensions 462/490 mm (W)(Body/Guides) x 88 mm (H) x 286 mm (D)
Weight 5.8kg
Material Mild Steel
Colour Light Grey