This FTTP wall outlet, will achieve a long service life. The outlet houses a single A/SC connector, for a single fibre service. A spring loaded flap covers the connector end position, when not in use. The unit has a full height, clip on ivory coloured cover. The outlet mounts on a standard 84mm centres GPO style bracket/s. The outlet also mounts on standard GPO “build‐out” plastic mounting block. The outlet can be mounted in a wall, or be surface mounted as it is fully compatible with standard GPO mounting components, that are available separately from Electrical Wholesalers.
Has a spring loaded flap that covers connector position, when not in use. This excludes dust and is a safety measure against viewing lasers
Mounts with a standard GPO mounting bracket/s and modules at 84mm centres
Supplied with a shutter type A/SC through adaptor with a ceramic zirconia ferrule, < 0.1 dB insertion loss
Available in FRHF or polycarbonate material
Manages 900 micron fibre or 2mm dia cords internally, at an MBR of 15mm
Manages 2.4mm, 2.9mm and 4.8mm nominal dia premise cables, using 3 inputs
Manages a fusion splice or a mechanical splice between the premise cable (either 2.4, 2.9 or 4.8mm dia) and 900 micron fibre or 2mm dia fibre pigtail, with a field type termination A/SC connector; available separately
Manages a pre‐terminated A/SC premise cable/s of from 2.4mm, 2.9mm and 4.8mm nominal dia cords
Compatible with 3M Onepass Unit fibre
Safety label provided inside the removable cover
Able to accept a pre‐terminated A/SC connector from a rear input
Able to use field terminable, and field splice‐on connectors
Can mount on standard GPO style Build‐out modules, that can be used for fibre cord storage
Has a removable, clip‐on cover for ease of access
Available as a single unit with an Ivory colored cover provided
