Meets G652D specification. Yellow, 9um core dia.125um cladding dia and a 900um tight buffered jacket.
The SC APC and the LC UPC Grade A* very low-insertion loss connectors are individually recognizable (e.g. SC APC connector shroud coloured green and with the marking on the connector shroud) and has a shroud/ boot (e.g. A/SC the boot is green) fitted between the connector and individual cords. The end angle of the A/SC connectors ferrule is 8 degrees when measured between a central vertical line and the end of the connectors ferrule end face. The LC UPC connector has a blue coloured body and has a label with the marking on the shroud, the boot is blue coloured. Both connectors are manufactured to recognized and approved industry standards and will achieve a 20 year service lifetime, under typical operational conditions. The connectors are fitted with a ceramic e.g. zirconia ferrule. Each connector assembly is capable of a reasonable number (e.g. 500) of matings/unmatings, and of withstanding normal (not excessive) operational handling forces/loads without suffering any damage or a significant increase in optical performance. The complete assembly is capable of reliable operation in Exchanges or Repeaters over the temperature range of -20 degrees to +70 degrees Celsius and up to high levels of RH.
* Grade A connectors have not yet been ratified by the standard bodies.
** Max. Input Power can only be applied, if connector end faces are absolutely clean.
A/SC connector: 10mm (W) x 10mm (H) x 70mm (L) (Over Boot) x Cord “L” m long
LC UPC connector: 8mm (W) x 50mm (L) (Over Boot) x Duplex Cord “L” m long
|Weight||Cord: 20 grams/metre|