Connector, IPC 95-185 main/6-95 tap sq mm

Connector, IPC 95-185 main/6-95 tap sq mm

Connector, IPC 1.5-16/1.5-16 tap sq mm

Connector, IPC 1.5-16/1.5-16 tap sq mm

Balun, 120/75OHM BNC male 90 degree to Krone idt

Balun, 120/75OHM BNC male 90 degree to Krone idt

Connector, IPC 95-185 main/6-95 tap sq mm

A$23.76
WBT P/N
35300609

The IPC is made from fibreglass reinforced plastic material, with 2 sets of internal contact teeth for each of the main and tap cables. The contact teeth are thin and strong, to enable good penetration into the cable/s. Top and bottom pressure plates and the 1 x tightening bolt are made of corrosion protected steel. The IPC can be safely used on live power cables (or earth cables) of – 48V DC. When the IPC’s bolt is progressively tightened the contact teeth are forced through cable insulation, less than 3mm thick, to make an electrical connection. The IPC’s can be used on aluminium and copper main and tap-off conductors. Only tighten the IPC’s bolt to the recommended torque of 35Nm. These IPC’s are to be used indoors, in a dry situation.

Important: Tighten the bolt progressively, up to the recommended torque value of 35Nm, in order to ensure an even and level mating between the two halves of the IPC.

More Information
Telstra Product Name CONNECTOR,IPC 95-185MAIN/6-95 TAP SQ MM
Telstra SKU 35300609
UNSPSC 43222814
  • Provides a quick and effective means of installing tap-offs in power or earth cables.
  • Used in Exchanges or CO’s at a voltage of – 48V DC, or on the earth cable/s
  • Has a knock out end cap, for the tap cable
  • Easily and quickly installed
  • Purchase as a unit