Universal optical fibre splice tray assembly (12 splices)

Universal optical fibre splice tray assembly (12 splices)

Splice tray assembly (8 splices)

Splice tray assembly (8 splices)

Heat shrink splice protector holder, 12 fibre capacity, 2.8mm dia

Heat shrink splice protector holder, 12 fibre capacity, 2.8mm dia

Universal optical fibre splice tray assembly (12 splices)

A$29.43
WBT P/N
TC251S-1AX

This universal splice tray can safely store either 12 or 24 fusion splices using two clip type fusion splice protector holders as listed below. It is used for 12 fusion splices, using two clips Part No: TC250S-10, which are included in Part No: TC251S-1AX. It can also be used for 24 fusion splices, using two clips Part No: TC250S-13. The splice tray can also house 12 fibre ribbon splices. Other splice holder clips are also available.

  • TC250S-4 Holds five fibre optic couplers (about 3.2mm dia.) 
  • TC250S-7 Holds five 12 fibre ribbon splices, and/or mechanical splices eg 3M, etc 
  • TC250S-10 Holds six heat shrink type splice protectors 
  • TC250S-11 Holds eight splice protectors, Siecor metal type 
  • TC250S-13 Holds twelve heat shrink type splice protectors 
  • TC250S-23 Holds a 12 fibre ribbon splice, a single splice and a ribbon/fan-out pigtail module 
  • TC250S-30 Holds four heat shrink type splice protectors 
  • TC251S-8 Holds eight heat shrink type splice protectors

The tray features four, ratchet action, loose tube clamps with foam rubber padding to minimise crush. They can be hinged at the side to form a stack (using hinge set Part No: TC251S-2) and a lid (Part No: TC251S-5) is available if needed. Part No: TC251S-1AX includes a universal splice tray; 2 x TC250S-10 heat shrink splice protector holder clips and lid, Part No: TC251S-5. This tray is also available as a stackable type, with individual access available to each splice tray. Using suitable plastic clips 12 fibre ribbon splices can be housed on the tray. Also using the clip ( Part No: TC250S-23) a fan out module from 12 fibre ribbon to 12 x 900 micron individual pigtails can be accommodated.

  • Accepts either 12 or 24 spliced fibres. 2 x TC250S-10 heat shrink splice protector clip holders included in Part No: TC251S-1AX 
  • Can also be used with 12 fibre ribbon, for splicing and housing a fan out module from ribbon to individual pigtails 
  • Loose tube clamps incorporated in the tray design 
  • Other splice protector clips, available separately, specify requirements 
  • Heat shrink splice protector, 40mm long (Part No: 100x080,  Pack of 100) available separately 
  • Purchase as a unit

 Dimensions 

194mm (W) x 10mm (H)(without lid) x 116mm (D); Lid: 3mm (H) 

Weight 

65 grams (without lid); 100 grams (with lid) 

Materials 

Noryl E190 VO 

Colour 

White