Fibre optic patch panel, Splice/Patch, OM3, 72 fibre, 2RU

In stock
Stock Code
60083221162081
A$1,196.27 Incl. GST
favorite Add to Wish List

This subrack is typically used in Optical Fibre Termination Frames.

The main functions of the subrack are to provide: a managed standard fibre installation, reticulation, interconnection, distribution, re-arrangement and maintenance activities at a common point. It also allows for fibre testing and fault finding activities. Typically an external optical fibre cable is fusion spliced to pigtails, which are connected to patch cords. Typically the patch cords can cross-connect (in an FTF) or connect to transmission equipment.

A major feature of this tray is the minimum amount of movement that occurs to loose tubes and optical fibre cords, as the tray opens and closes. This ensures a very high degree of protection for working services. Also, the fusion splices and pigtails are located in a protected position, because there is very little chance of them being disturbed when patch cords are being installed, as the subracks tray only needs to be opened a very small amount.

  • Splice/Patch RH pivot open Subrack (2RU), for 72 multimode OM3 optical fibres, rear mounts in a 19“ rack
  • Maintains fibre bending radii throughout, for optical fibres at 30mm.
  • Supplied with 1 set of 6 high 12 fibre, splice tray assemblies (Part No: TC251S-6AX), for 72 fusion splices.
  • Two splice protector holder clips located on each splice tray.
  • Splicing aided by using the splice tray holding bracket, to hold open splice tray stack
  • Optical fibre tubes are fed to the trays LHS entry securing point, then around the rear of the body under a guiding/protection plate, to pass around the RHS guiding cylinder to the splice trays, through smooth, large curves.
  • Cable is secured at LHS entry point
  • 3 x 24 position, angle located patch panels positioned along front of tray provides patching connection for 72 optical fibres, with SC UPC connectors, that are supplied.
  • Entry and exit fibre cords are guided by a 30mm radius outlet trumpet
  • A hinged front cover, with a patch panel label is located in front of the patch panels. Cover secured with magnetic catches.
  • SC UPC connectors have a ceramic, zirconia ferrule
  • SC UPC - MMOF pigtails (OM3 type) are supplied, fitted to subrack
  • A plastic cover is supplied
  • Supplied with 19” rear mounting brackets and mounting hardware
  • Hook and loop style fasteners supplied
  • Front and mid mounting brackets for a 21” rack; available separately (S 494/00557)
  • Heat shrink splice protectors (Part No: 65404003 – Pack of 75); available separately
  • Purchase as a unit

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Looking for optic fibre and copper communications equipment?

Contact us