Joiner, 600mm x 100mm

Joiner, 600mm x 100mm

Joiner, 100mm x 50mm

Joiner, 100mm x 50mm

Joiner, 600mm x 100mm

A$52.36
WBT P/N
TC1279-410A

The joiner is used to link standard 6 00mm straight ducting with any duct components. It provides a smooth & strong joint. Typical other components are: horizontal elbows and 600mm to 300mm reducers etc.; which require a joiner at each interface. T he joiner is first fitted to the squ are ends of adjacent 600mm duct (or components) and 6 x Ø 8 mm holes are drilled through both duct sides and ends, matching the holes in the joiner. Then a small Ø 8 mm screw rivet (supplied) is inserted in each hole. The end of the screw rivet expands to ma ke a mechanically strong and permanent joint.

More Information
Duct Size 600x100mm
  • Quickly installed on 600mm duct components, to achieve a positive connection
  • Screw rivets can be released and removed, by using a Phillips Head screwdriver
  • Tough, fire retardant material
  • Supplied as a single moulded item
  • Fits straight onto standard 600mm duct and components, using 6 x Ø8mm screw rivets (supplied) that ensures a mechanically strong and rigid joint is made between adjacent components
  • Purchase by the unit