SC/A optical fibre singlemode pigtail

SC/A optical fibre singlemode pigtail

Optical fibre pigtails, 900um with ribbon breakouts 3 different lengths, 1 set (ODF spares)

Optical fibre pigtails, 900um with ribbon breakouts 3 different lengths, 1 set (ODF spares)

SC/A optical fibre singlemode pigtail

As low as A$14.80

Meets G652D specification. Yellow; Ø9μm core, Ø125μm cladding and a Ø900μm tight buffered jacket. 

WBT P/N
631002XXASCA

This SMOF pigtail with A/SC Grade A* connectors of “L”m length, is made with a Ø2.0 mm dia. optical fibre cord. The SMOF meets G652D specification, with no water peak in the wavelength profile graph, and Telstra Specification 1557 Part 2 Issue 6. The single optical fibre cord has the following features: coloured yellow; Ø9μm core, Ø125μm cladding and a Ø900μm tight buffered jacket. The core has an aramid yarn (e.g. Kevlar) strength member provided under an LSZH sheath. The cord has physical properties of minimum tensile strength of 100N; an MBR of 25mm; ability to withstand a small crushing load; and the ability to withstand a small impact load. The cord also passes Telstra’s edge bend test.

More Information
UNSPSC 26121616
  • All dielectric construction
  • Has Փ900μm LSZH jacketed optical fibre
  • Used for optical fibre termination
  • Fitted with quality low insertion loss A/SC ‘Grade A*’ connectors
  • Connectors have a ceramic, zirconia ferrule
  • Minimum lifetime of 20 years
  • Purchase as a unit

* Grade A connectors have not yet been ratified by the standard bodies.
** Max. Input Power can only be applied, if connector end faces are absolutely clean.

Dimensions Connector: 9mm (W) x 10mm (H) x 55mm (L) (Over Boot)x Cord “L”m long
Weight 10/gm
Materials Various
Colour Green and Yellow